Smart Meter Installation & Metering Services in Sydney
A smart meter, also called an advanced meter, is a digital electricity meter that records energy use in 30 minute intervals and sends the data to your retailer remotely. Our licensed Level 2 ASP electricians install, replace and upgrade meters across Sydney, with full NSW compliance documentation.
Top Electricians Sydney provides metering services for residential, commercial, and small business properties across the Ausgrid and Endeavour Energy networks. We handle new meter connections, solar meter reconfigurations, meter box upgrades, temporary builder's supply, and emergency meter repairs, and we follow the NSW Service and Installation Rules on every job.
- Same-day availability where network approvals allow
- Fully licensed and insured Level 2 ASP electricians
- 24/7 emergency call-out for urgent meter faults
- Upfront pricing and free on-site quotes
Request a Call Back
Fill-in your details below and
we will get back to you soon
Our Specialties
Professional
Skilled and well-presented team.
Trusted
Over 17 years of proven service.
Prompt
Fast response for urgent calls.
Guaranteed
Quality work with full warranty.
Why Do You Need a Licensed Level 2 Electrician for Metering Work in Sydney?
Metering work on the electricity network in NSW can only be carried out by a Level 2 electrician who holds Accredited Service Provider (ASP) authorisation. Unlicensed work risks defect notices, failed inspections and disconnection of your power supply by the network operator.
A Level 2 electrician is accredited under the NSW ASP scheme to connect, disconnect and alter the supply network up to your metering point. That accreditation is what allows us to lodge applications with Ausgrid or Endeavour Energy, isolate the supply safely and certify the finished work.
The work that only an ASP-accredited electrician can carry out includes the following:
- New meter connections to the distribution network
- Meter box relocations and service line alterations
- Temporary builder’s supply installations
- Repairs to correct a network-issued defect notice
- Solar and battery metering reconfigurations that need network approval
What Metering Services Do We Provide in Sydney?
We provide new electricity meter connections, smart meter replacement, meter box upgrades, three phase metering, solar meter reconfiguration, temporary builder’s supply and emergency meter repairs. Every job ends with compliance paperwork lodged with your network provider.
Our Level 2 ASP electricians work on single phase residential jobs through to commercial and industrial metering. The services below cover the most common metering requests we receive across Sydney.
New Electricity Meter Connection
A new electricity meter connection links your property to the distribution network for the first time. Our ASP electrician submits the network application, completes the on-site wiring and coordinates energisation with your retailer.
This is required for new homes, granny flats, dual occupancies and commercial fit-outs. Because all new meters must be advanced meters, your connection is set up for smart metering from the start.
Smart Meter Installation and Replacement
All new and replacement meters installed in NSW since 1 December 2017 must be advanced smart meters. A smart meter replaces a legacy accumulation meter, removes manual meter reads, and gives your retailer 30 minutes of usage data.
Under the national metering rules, a retailer’s metering provider normally supplies and fits the meter itself. Our role is the electrical side: assessing your meter box and switchboard, isolating the supply, correcting any defects and issuing the Certificate of Compliance for Electrical Work (CCEW). Most replacements take around one hour, with a short interruption to your power.
Meter Box Relocation and Upgrades
A meter box relocation moves your metering point to a safer or more accessible position on your property. It requires ASP accreditation and written network approval before work begins.
Relocations and upgrades are usually needed when a renovation, extension or landscaping project blocks access to the existing box, or when the box is damaged, unsafe or no longer meets the NSW Service and Installation Rules. We also handle the related switchboard upgrades, repairs and relocation so the meter box and switchboard are compliant together.
Three Phase Meter Installation
Three phase metering supports 230/400 volt supply with three active conductors plus a neutral. It suits commercial kitchens, workshops, large homes and any property running heavy machinery or high-load equipment.
Only a licensed Level 2 electrician can legally install or upgrade three phase supply. We manage the network application, the meter change and the on-site installation. For the full upgrade process, see our 3 phase power upgrades service.
Solar Meter Upgrades and Reconfiguration
A solar meter upgrade sets your meter to record both electricity imported from the grid and surplus solar energy exported back. If an existing smart meter only needs reconfiguring for bidirectional billing, the cost typically falls between $80 and $150.
An old accumulation meter cannot record exports, so it must be replaced before your solar system can be legally switched on. We coordinate the change with your retailer so that your feed-in billing starts correctly.
Temporary Builder’s Supply Meters
A temporary builder’s supply gives tradespeople metered power on site while no permanent connection exists. Only a Level 2 ASP electrician can legally install this setup.
We install the temporary pole or pillar, fit the metering, and hand over compliance paperwork so your build stays powered and inspected throughout construction. When the build is complete, we convert the supply to a permanent connection.
Defect Notices and Non-Compliant Meters
A defect notice is a formal notice from a network operator or inspector stating that part of your electricity supply is unsafe or non-compliant and must be rectified by a licensed ASP within a set time.
We assess the fault, carry out the repair and submit the compliance paperwork directly to Ausgrid or Endeavour Energy. If the notice relates to your fuse box or service fuse, our service fuse and fuse box repairs team can complete that work in the same visit.
Emergency Meter Repairs
Emergency meter repairs cover damaged, burnt, sparking or dead meters that leave a property without safe power. Our Level 2 electricians respond 24/7, make the supply safe and issue a Certificate of Compliance on completion.
If you can smell burning or see scorching at the meter box, switch off at the main switch if it is safe to do so and call us straight away. See our 24/7 emergency electrician service for urgent call-outs.
We’re Just a Call Away. Let’s Get Started!
When Should You Upgrade or Replace Your Electricity Meter?
You should upgrade your meter when it can no longer measure your property’s electricity use accurately or support new equipment. The most common triggers are installing solar, adding an EV charger, receiving repeated estimated bills, and owning an old accumulation meter.
The four situations below account for most meter upgrade requests. Waiting too long risks defect notices, estimated billing and supply problems across your whole property.
Installing Solar Panels
A bidirectional smart meter is required before solar can be legally activated, because it records both grid imports and solar exports separately. Old accumulation meters cannot do this.
If your system is already installed but your meter is not yet set up for exports, contact us before your retailer’s activation date so the changeover does not delay your feed-in credits.
Adding an EV Charger
An electric vehicle charger adds a large, sustained load to your supply. A smart meter records that demand accurately, and it makes time-of-use and controlled load tariffs available to reduce charging costs.
We can assess your meter, switchboard and supply capacity together with your EV charger installation, so one visit covers both.
Receiving Estimated Electricity Bills
Frequent estimated bills usually mean your retailer cannot obtain an accurate reading from your existing meter, often because it is faulty, inaccessible or out of date. A smart meter replacement restores accurate digital readings.
Once a smart meter is in place, your retailer receives usage data remotely, so bills reflect actual consumption and no meter reader needs access to your property.
Old or Faulty Accumulation Meters
Accumulation meters need manual reads every few months and cannot support solar, batteries or time-of-use tariffs. Faulty meters must be replaced with advanced smart meters, and ageing units are increasingly flagged for replacement.
If your meter is cracked, corroded, has a damaged seal or shows an unreadable display, book an electrical safety inspection so we can confirm whether the meter, meter box or wiring needs work.
Increasing Electrical Load
Adding a pool pump, air conditioning, solar system or EV charger raises your maximum demand. If your existing meter and supply cannot handle the extra load, an upgrade is needed to keep the supply safe and billing accurate.
In some cases the solution is a single phase to three phase conversion, which we complete as part of a 3 phase power upgrade.
How Does Our Meter Installation Process Work?
Our process runs in five steps: site assessment, network application, safe isolation and installation, testing and energisation, then compliance certification. Most standard meter jobs finish in a single visit once approvals are in place.
The five steps are as follows:
Site Assessment
We inspect your meter box, switchboard and supply, and confirm whether you are on the Ausgrid or Endeavour Energy network.
Network Application
We lodge the required applications and notifications, including approval for relocations and new connections.
Safe Isolation and Installation
We isolate the supply, complete the metering work and correct any defects found.
Testing and Energisation
We test the installation and coordinate reconnection with your retailer or metering provider.
Compliance Certification
We submit the Certificate of Compliance for Electrical Work (CCEW) within seven days and give you a copy for your records.
Our Smart Meter Installation Services Across Sydney
Our metering services cover a wide range of residential and commercial requirements, from installing new electricity meters to upgrading existing systems. Our Level 2 ASP electricians manage the complete process, including assessment, installation, network coordination, and compliance documentation.
Detailed Services
Popular Service We Provide
3 Phase Power Upgrades
Upgrade to a 3-phase power system for smoother performance and greater efficiency in heavy-load appliances and equipment. Ideal for homes and businesses needing stable power supply.
Switchboard Upgrades, Repairs & Relocation
Modernize or relocate your switchboard for improved safety, compliance, and energy distribution — all handled by licensed electricians.
Service Fuse and Fuse Box Repairs & Upgrades
Protect your home from electrical hazards with professional fuse box repairs, replacements, and upgrades using modern safety standards.
We locate electrical faults with diagnostic tools. Our team fixes short circuits, ground issues, and voltage drops that cause flickering lights, dead outlets, or dangerous sparks.
Why Choose Top Electricians Sydney for Your Metering Work?
Built on Trust, Delivered With Excellence
We combine ASP accreditation, 17 years of experience and full compliance documentation on every job. You get a licensed Level 2 team that handles the network paperwork, the on-site work and the certification.
Safety First
Your safety is our top priority. Every installation, repair, and upgrade we complete follows strict Australian Standards and Level 2 regulations -ensuring total compliance and long-term peace of mind.
Professionalism
We take pride in our work. From residential jobs to large-scale commercial projects, our team delivers neat, efficient, and high-quality results that reflect the professionalism of Top Electricians Sydney.
Reliability
You can count on us 24/7. Whether it’s an emergency power fault or scheduled maintenance, we respond quickly and complete every task on time — with honest communication throughout the process.
Innovation
We embrace modern technology to provide energy-efficient, cost-effective, and future-ready electrical solutions — from smart metering to EV charger installations and sustainable energy systems.
How Much Do Smart Meter Installation and Meter Repair Cost in Sydney?
Smart meter and metering costs in Sydney range from $0 for a standard retailer-led smart meter rollout up to $3,500 for a meter box relocation. Price depends on meter type, phase configuration, network approvals and whether solar integration is required.
The table below compares our typical rates for the seven most requested metering services.
| Service | Our Typical Cost | What Affects the Price |
|---|---|---|
| Standard smart meter installation | Often no direct charge under a retailer-led rollout | Retailer and metering provider terms |
| Solar meter reconfiguration | $80 to $150 | Retailer, meter model, export settings |
| Site inspection (pre-install) | Free | Property access |
| Emergency meter repair | $350 to $700 | Time of call-out, extent of damage |
| Meter box upgrade (safety switch) | $750 to $1,600 | Box condition, RCD requirements |
| Defect clearing (Ausgrid / Endeavour) | $450 to $1,300 | Type and extent of defect |
| Meter box relocation (Level 2 ASP) | $1,600 to $3,500 | Distance moved, network approval, cabling |
Every job begins with a free on-site quote, so you know the price before work starts. There are no hidden charges, and the quote covers the compliance certificate and network paperwork.
We’re Just a Call Away. Let’s Get Started!
Which Sydney Areas Do We Cover for Metering Services?
We provide metering services across all Sydney areas, 24/7, for properties supplied by both Ausgrid and Endeavour Energy. Your network is determined by your street address, and we confirm it during your site assessment.
Our metering and emergency meter repair services are available in the following Sydney regions:
- Central Sydney
- Eastern Suburbs
- Northern Suburbs
- Southern Suburbs
- Western Suburbs
Each network has its own application forms, service rules and approval times, which is why using an ASP electrician who works in both matters. Browse our full list of electrical services or get a free quote for your suburb.
Reasons to choose Top Electrician for Metering Services
Top Electrician delivers professional three phase upgrades with certified expertise, transparent pricing, and reliable service across Sydney.
What Sets Us Apart
We deliver high-quality workmanship with friendly service, ensuring every project meets our strict standards. We carefully select our team for expertise and professionalism. We provide reliable, top-notch metering services across Sydney, combining skill, experience, and a customer-focused approach on every job.
24/7 emergency electrical support
We provide round-the-clock emergency assistance, responding quickly to urgent electrical issues whenever you need us.
Experienced Level 2 Electricians
We employ skilled Level 2 electricians who handle every metering task safely and efficiently. We ensure each installation, replacement, or repair meets strict standards, providing professional, reliable service across Sydney for all residential, commercial, and industrial clients.
Residential, Commercial & Industrial Coverage
We provide metering services for homes, businesses, and industrial sites throughout Sydney. We adapt our solutions to suit each property type, ensuring consistent safety, efficiency, and high-quality workmanship for every client, no matter the project size or complexity.
Transparent Pricing & Sydney-Wide Service
We offer clear, transparent pricing with no hidden fees. We serve all Sydney suburbs, delivering reliable metering solutions backed by professionalism and expertise. Our clients receive upfront quotes, ensuring confidence and satisfaction on every project we undertake.
Emergency Storm Damage Repairs
We respond promptly to storm-damaged meters, restoring power safely and efficiently. Our emergency electrician team prioritizes urgent repairs while maintaining strict safety standards, helping homes and businesses recover quickly with dependable, professional service across Sydney
We’re Just a Call Away. Let’s Get Started!
How Does Our Smart Meter Installation Process Work?
Our smart meter fitting process runs from site assessment through to network approval, installation, and certified testing. Every step follows NSW Service and Installation Rules, with minimal disruption to your property from start to finish.
Site Inspection and Assessment
A site inspection checks your existing metering point, wiring condition, and network connection requirements. This step determines the exact scope of work before anything is booked.
Network Approval and Scheduling
A Connection Application must be submitted and approved by Ausgrid before any service work begins. Our team handles all network paperwork and schedules your installation date directly.
Digital meter installation and Configuration
Our ASP accredited team installs and configures your new meter to distributor specifications. The unit is wired, tested, and set up to record your energy data correctly.
Final Testing and Compliance Certification
A Certificate of Compliance for Electrical Work must be submitted no later than seven days after the electrical test is completed. Your job is fully certified and lodged with the network.
our service VS. other service
Frequently Asked Questions About Smart Meter Installation in Sydney
What is a smart meter?
A smart meter, also called an advanced meter, is a digital meter that records your electricity use in 30 minute intervals and sends the data to your retailer remotely. It replaces manual meter reads and estimated billing.
Do I have to pay for a smart meter installation in Sydney?
A standard retailer-led smart meter replacement is often provided without a direct charge, although retailers may recover costs through their network fees. Extra electrical work, such as meter box repairs, relocations or solar reconfiguration, is charged separately, and we quote these upfront.
How long does a smart meter installation take?
Most smart meter replacements take about one hour, with a short interruption to your power supply. Meter box relocations, new connections and three phase upgrades take longer because network approval and additional wiring are required.
Can I choose not to get a smart meter?
If your existing meter is working, you can usually keep it until it fails or needs replacing. However, all new connections and replacement meters must be smart meters, and solar customers need a bidirectional meter.
Who can legally install or replace an electricity meter in NSW?
Only a licensed Level 2 electrician with ASP accreditation, or a retailer’s authorised metering provider, can work on the metering point. Work by anyone else can trigger a defect notice or disconnection.
Do I need a new meter when I install solar panels?
Yes, in most cases. Solar requires a bidirectional meter that records imports and exports separately. If you already have a smart meter, it may only need reconfiguring, which typically costs $80 to $150.
What is a defect notice on my meter?
A defect notice is issued by a network operator or inspector when part of your supply is unsafe or non-compliant. It must be rectified by a licensed ASP, who then submits compliance paperwork to Ausgrid or Endeavour Energy.
What is the difference between a single phase and three phase meter?
A single phase meter supports standard household loads, while a three phase meter supports 230/400 volt supply with three active conductors. Three phase suits large homes, workshops and commercial sites with heavy equipment.
Will my power be off during a meter replacement?
Yes, briefly. The supply must be isolated for safe work, and this usually lasts around an hour for a standard replacement. We advise you in advance so you can plan around it.
Do you offer emergency meter repairs in Sydney?
Yes. We respond to urgent meter faults 24/7, make the supply safe and issue a Certificate of Compliance on completion.
Ready to Book Your Metering Service in Sydney?
Contact us today for a free quote, expert advice or to lock in your installation date. We respond quickly across all Sydney metro areas.
There are three easy ways to get started:
- Request a free quote: Covers labour, materials and compliance paperwork. Contact us online or by phone.
- Speak with a Level 2 electrician: Get direct, honest advice from our ASP team, with no call centres.
- Schedule your installation: Pick a time that suits you and we arrive on time, finish to full compliance and leave your property clean.
Call 0431 460 141 or request a free quote and the Level 2 team at Top Electricians Sydney will confirm your network, your requirements and your price.
We’re Just a Call Away. Let’s Get Started!
We Use Industry Leading Products
